Exterior Wall Paint
Application Scope
It is widely used for decoration and protectionof wall of office building,factories, schools, hotels,residential districts
Construction instructions
1.Substrate treatment: New wall surface - remove surface dust, grease and loose mortar. If there is any gap, it should be repaired in time to ensure that the wall is clean, dry and smooth. Renovation of the wall - remove the weak paint film on the old wall, remove dust and impurities on the surface, leveling, polishing, cleaning and thoroughly drying; Ensure that the surface moisture content of the pre-coated substrate is less than 10% and the pH value is less than 10%. The surface of the pre-coated substrate must be firm, dry, clean, flat and free of loose substances.
2.Construction method:
alkali-resistant primer - spraying, roll coating and brushing can be used.
3.Real stone paint - spray twice (air pressure 0.6-0.8 mpa), total thickness of about 3 mm;
4.Covering varnish - spraying, roll coating and brushing can be applied.
Product Features
1,Made from natural rock crushed, natural materials are not easy to fade 2.The rock-like original style fully demonstrates the rich texture of natural stone 3,Good environmental performance and non-toxic 4,Super adhesion, hard coating, heat and flame retardant, anti-aging, anti-fungal, waterproof and anti-pollution 5,Any pattern shape, color combination is not limited 6,Reduced wall load.
Cement Fiberboard
Culture Stone
PVC Wall Panel
WPC Board
